Powerform 18

pi controls
  • Powerform® 18 is a high strength rotation resistant hoist rope.
  • Good resistance to rotation.
  • Suitable for use on single part and multi-part hoist reeving systems.
powerform18-img1
Powerform 18
Standard Characteristics Powerform® 18
Compacted Yes No
  ■
Lay Direction Right Hand Left Hand
■  
Lay Type Ordinary Langs
  ■
Nominal Fill Factor 0.663
Turn value at 20% of Breaking force degrees/ ‘6.25d’ 5
Discard Criteria Refer to ISO 4309:2019
NOMINAL ROPE DIAMETER APPROX. MASS MINIMUM BREAKING FORCE
GALVANISED & UNGALVANISED
ROPE GRADE
      1960 2160
mm in kg/100m kN tonnes kN tonnes
6   17.5 29.4 3.0    
7   23.8 38.0 3.9    
8   31.0 51.8 5.3    
9   39.3 64.6 6.6    
10   48.5 80.8 8.2    
11   58.7 101 10.3 111 11.3
12   69.8 116 11.8 127 12.9
  1/2 78.2 135 13.8 148 15.1
13   82.0 141 14.4 155 15.8
14   95.1 160 16.3 177 18.0
15   109 182 18.6 201 20.5
16 5/8 124 209 21.3 232 23.6
17   140 237 24.2 262 26.7
18   157 266 27.1 295 30.1
  3/4 175 291 29.7 322 32.8
20   194 320 32.6 359 36.6
22   235 379 38.6 424 43.2
24   279 462 47.1 523 53.3
  1 313 517 52.7 585 59.6
26   328 542 55.2 613 62.5
28   380 632 64.4 710 72.4
30   437 721 73.5 809 82.5
32 1-1/4 497 820 83.6 920 93.8

Note: Rope Sizes and Breaking Force not shown in the standard table, may be available on request and prior confirmation.

Send Enquiry